3D Object item panel options
3D Object item panel options
When the 3D Object item is
selected, its panel is displayed below the splitter bar. The following settings
are available:
|
Button |
Function |
|
|
Click the Transform button to interactively move, rotate, and scale the selected item. |
|
|
Click the Nudge button to adjust the position of the selected item. |
|
|
Click the Scale button to scale the size of the selected item in any of the three axes, or in all axes simultaneously. |
|
|
Click the Object Selection button to turn on object selection. |
|
|
Click the Lay on Surface button to lay an assembly component on the surface of a model. |
|
|
Click the Emboss Relief Wizard button to automate the process of creating embossed reliefs. |
|
|
Click the Copy Component to Vectors button to copy the assembly component to selected vectors. |
The Dimensions area displays the dimensions of the selected 3D object.
See also
|
|
|
Related Articles
Gem item panel options
Gem item panel options When the Gem item is selected, its panel is displayed below the splitter bar. The following settings are available: Button Function Click the Transform button to interactively move, rotate, and scale the selected item. Click ...Assembly item panel options
Assembly item panel options When the Assembly item is selected, its panel is displayed below the splitter bar. The following settings are available: Button Function Click the Transform button to interactively move, rotate, and scale the selected ...Machine Relief panel — Options
Machine Relief panel — Options Use the options in the Options area to add lead in moves, specify the Safe Z value and define the material block: Lead In Moves — Click the control bar and select Add ramping to display the add ramping moves settings: ...Fluting panel — Options
Fluting panel — Options The Options area contains the following settings: Cut sequence — Click the control bar to specify the order in which each toolpath segment is machined. Safe Z and Home — Click the control bar and enter: a value in the Safe Z ...Profile panel — Options
Profile panel — Options The Options area contains the following settings: Cut sequence — Click the control bar to specify the order in which each toolpath segment is machined. Safe Z and Home — Click the control bar and enter: a value in the Safe Z ...