Calculating a batch of toolpaths

You can calculate several toolpaths in sequence using Carveco's batch calculation process. This gives you the freedom to work continuously on creating a model during the day, and calculate all of its corresponding toolpaths during the night.

If you click Calculate Later when creating a number of toolpaths, you can calculate them in a batch sequence afterwards.
You cannot batch calculate toolpaths created with the 2D Machining Wizard.

On the Project Tree, the names of all uncalculated toolpaths are listed in red, and the names of all calculated toolpaths are listed in white. Uncalculated parent toolpaths do not have any associated child toolpaths , , .

To calculate a batch of toolpaths:

1. In the Project panel, click the Toolpaths item to display the Toolpaths panel below the splitter bar.
2. In the Toolpaths panel, click the Batch Calculate Toolpaths button to display the Batch Calculate Toolpaths dialog.
   
   

   The toolpaths in the Toolpaths Available For Calculation area are listed in the same order as they are in the Project Tree.

   The names of calculated toolpaths are listed in black, while those of uncalculated toolpaths are listed in red. All uncalculated toolpaths are selected by default.

3. Ensure Calculate Toolpaths is selected.
4. In the Toolpaths Available For Calculation area, ensure that only the toolpaths you want to calculate as part of this batch are selected.
   You can recalculate any previously calculated toolpath as part of the batch calculation process.
   • To toggle the selection of a specific toolpath, click the check-box beside its name.
   • To deselect all toolpaths, click Select None.
   • To select all toolpaths, click Select All.
5. Click Start to begin the batch calculation process.

   In the Status window, the following details are displayed during the batch calculation process:

   • The time and date on which the batch calculation process commences;
   • The elapsed time for the calculation of each toolpath within the batch; and
   • The elapsed time for the entire batch calculation process.
     If you want to cancel the batch calculation process at any time, click Stop.
6. Click Close to close the Batch Calculate Toolpaths dialog.

See also

• Setting the toolpath order