Contrast slider

Contrast slider

Contrast slider

Use the Contrast slider on the 2D View and 3D View toolbars to set the amount of shading applied to the active bitmap layer's artwork. Use it to make it easier to draw vector outlines around specific areas within an image.

To make colours more saturated, drag the slider to the left; to restore the artwork to its original sharpness, drag the slider to the right.

Contrast slider set at 50%

Contrast slider set at 100%



    • Related Articles

    • Light and shading settings

      Light and shading settings You can illuminate selected areas of the composite relief shown in the 3D view using up to four types of light in different combinations. To change the light or shading settings: Select Model > Light and Material Setup or ...

    • Bitmap > Erase

      Bitmap > Erase Use this menu option to remove all or part of your last painting or drawing action on the active bitmap layer.       The Erase Bitmap  button on the Design Tools toolbar is a shortcut for this menu option. The accessibility of this ...

    • Model > Adjust Resolution

      Model > Adjust Resolution Use this menu option to adjust the resolution of a model. This means you can disassociate the bitmap resolution from the model resolution. The Adjust Model Resolution  button on the Model toolbar is a shortcut for this menu ...

    • Bitmap > Draw Bitmap Line

      Bitmap > Draw Bitmap Line Use this menu option to draw a line on a bitmap layer using the primary or secondary colour.       The Draw Bitmap Line  button on the Design Tools toolbar is a shortcut for this menu option. The accessibility of this button ...

    • Bitmap > Paint

      Bitmap > Paint Use this menu option to paint on the active bitmap layer using the primary and secondary colours. You can use the Paint tool to modify any image on a bitmap layer you have created or imported into Carveco. The Paint button  on the ...