Use this menu option to display the Print Setup dialog and control the settings for the printer with which you are going to print the active view.

To adjust the printer settings:

1. Select File > Print Setup to display the Print Setup dialog.
2. Select the Name of the printer.
3. To change any of the default settings of the printer, such as the paper size and orientation, click Properties.
4. In the Paper area:
   
   
   1. Select the size of the paper you're printing on in the Size drop-down list.
   2. Select the tray or paper feed option you want to use when printing from the Source list.
5. Select the orientation that you want to use when printing:
   
   
   • Portrait — Select this option if you want to print the model vertically. Typically, portrait orientation is used for models that are taller than they are wide.
   • Landscape — Select this option if you want to print the model horizontally. Typically, landscape orientation is used for models that are wider than they are tall.
6. In the Options area, select the print option you want to use:
   • Print model to scale — Select this option if you want to print the model according to its physical dimensions.
     Before printing, ensure the model can fit onto the paper to which it is currently being printed.
   • Stretch to fit page — Select this option if you want to print the model according to the dimensions of the paper onto which it is to be printed.
   • Print current screen view — Select this option if you want to print the model as it is currently shown in the 2D view.
   • Output model border — If selected, Carveco prints a border around the edge of the model sheet so you can see where the sheet is
     If you are printing the 3D view, the print options are unavailable. In this instance, Carveco prints to fit the 3D view in its current orientation.
7. Click OK to print the active view and close the Print Setup dialog.