Sending relief to the relief clipart library

Use the Send to Relief Clipart Library button to copy the composite relief or the active relief layer to the Relief Clipart Library.

To copy the composite relief to the Relief Clipart Library:

1. In the Relief Clipart Library panel, select the library into which you want to copy the relief layer from the list.
2. Ensure the 3D view contains the composite relief you want to copy to the relief clipart library.
3. Click the Front Relief or Back Relief item in the Project Tree to display the Relief Layers panel below the splitter bar.
4. On the panel, click .

To copy a relief layer to the Relief Clipart Library:

1. In the Relief Clipart Library panel, select the library into which you want to copy the relief layer from the list.
2. In the Project panel, click beside the Front Relief or Back Relief item to display either the front or back relief-layer stack.
3. Select the layer you want to send to the Relief Clipart Library. The name is bold and highlighted, and its panel is displayed below the splitter bar.
4. On the panel, click .

   For each relief layer that you add to a library, two new files are created in its associated folder on your computer. These are:

   • a Carveco Relief (.rlf) file. This is given the relief layer's name.
   • a Windows Bitmap Image (.bmp) file. This is given the relief layer's name, is sized 100 x 100 pixels, and is used as a thumbnail image on the Relief Clipart Library panel.
     The availability of this feature is license dependent.

See also

• Relief > Clipart Library