Step 1: To create the model and import the piece of relief clipart

Step 1: To create the model and import the piece of relief clipart

Step 1: To create the model and import the piece of relief clipart


This section describes how to create the model and import the lizard design from the Relief Clipart Library.

To create the model and import the piece of relief clipart:

  1. Create the model:

    1. Display the New Model dialog.
    2. Select mm as the Units.
    3. Enter a:

      Width (X) of 500.

      Height (Y) of 300.

    4. Specify a Resolution of approximately 1500 x 900 points.
    5. Click OK.
  2. Import the lizard relief from the Relief Clipart Library:

    1. Display the Relief Clipart Library panel.
    2. In the Choose Library area, select Animals.
    3. Click the Lizard  thumbnail. The Tool Settings: Transform panel is displayed and the piece of relief clipart is shown in the 3D view.
    4. At the bottom of the panel, click More options. The panel displays options for pasting the relief clipart.
    5. Select the Add option.
    6. Select the Paste outline vector check box.
    7. Click Paste. Carveco adds the piece of relief clipart and displays the relief in the 3D view:


See also


    • Related Articles

    • To transform a piece of relief clipart

      To transform a piece of relief clipart When you have imported a piece of relief clipart, you can transform it by changing its scale, position, orientation, and shape before pasting it onto the relief layer. To transform a piece of relief clipart: In ...

    • Step 1: To create the model and vectors

      Step 1: To create the model and vectors This section describes how to create the model and the vectors for the Reception plaque. To create the model and the vectors: Create the model: Display the New Model dialog. Select mm as the Units. Enter a: ...

    • Step 2: To remove the bulk material

      Step 2: To remove the bulk material This section describes how to create the first machine-relief toolpath, which applies to the entire block of material. Use this toolpath to remove the bulk of the material using a 3 mm ball-nosed tool. To create ...

    • To add pieces of relief clipart to the Relief Clipart Library

      To accelerate working with reliefs, a collection of ready-to-use pieces of relief clipart are provided with your Carveco installation. To use the pieces of relief clipart, you must download and install the pieces to add them to the Relief Clipart ...

    • Step 3: To smooth the relief

      Step 3: To smooth the relief This section describes how to create the second machine-relief toolpath, which applies only to the relief itself, as defined by the vector boundary. Use this toolpath to surface finish the relief using a 1.5 mm ball-nosed ...