View > Snapping > Snap to Grid

View > Snapping > Snap to Grid

View > Snapping > Snap to Grid

Use this menu option to make the cursor snap to the nearest point on the grid when creating or editing vector artwork.

To temporarily disable the snapping behaviour, press and hold down the Shift key.

    • Related Articles

    • View > Snapping > Snap Grid Settings

      View > Snapping > Snap Grid Settings Use this menu option to set the spacing between grid points using the model's units of measurement, which you select in the New Model dialog. To set the grid spacing: Select View > Snapping > Snap Grid Settings to ...

    • View > Snapping > Snap+Draw On / Off

      View > Snapping > Snap+Draw On / Off Select this menu option to display the grid and enabling snapping of vectors to the grid.

    • View > Snapping > Snap Hints

      View > Snapping > Snap Hints Use this menu option to display snap hints in the 2D and 3D views when working with vectors. When this option is selected, small circles appear at potential snap points as the cursor moves near them. In the event that ...

    • View > Snapping > Snap to Objects

      View > Snapping > Snap to Objects Use this menu option to toggle snapping to objects on or off. Snapping is enabled by default. Using snapping, you can align a vector relative to another vector on any visible layer or guideline shown in the 2D or 3D ...

    • View > Snapping > Snap to Guidelines

      View > Snapping > Snap to Guidelines Use this menu option to toggle snapping to guidelines. A guideline is a dashed line parallel to the horizontal (X) or vertical (Y) axis that can be moved to any position in the 2D or 3D views. In the 2D view, you ...