Model Menu
Material and Background Settings
Material and Background Settings You can change the colour used to shade the composite relief in the 3D view, the brightness of the lit areas on its surface, and the reflectivity of its surface. You can also select a background colour or image for ...
Using the Colour Dialog
Using the Colour Dialog Use the Colour dialog to select the colour Carveco uses for the 3D view's lighting, material, and background. To select a colour using the Colour dialog: In the Lights and Material panel, click . The Colour dialog is ...
Light and shading settings
Light and shading settings You can illuminate selected areas of the composite relief shown in the 3D view using up to four types of light in different combinations. To change the light or shading settings: Select Model > Light and Material Setup or ...
Model > Lights and Material Setup
Model > Lights and Material Setup Use this menu option to adjust the appearance of the composite relief shown in the 3D view. The Lights and Material button on the Model toolbar is a shortcut for this menu option. The availability of this button is ...
Model > Spot Filter
Model > Spot Filter Use the options on this submenu to remove any isolated pixels within a scanned bitmap image. The selected spot filter is applied to the artwork on all bitmap layers in a model. A spot filter works better with black and white or ...
Model > Spot Filter
Model > Spot Filter Use the options on this submenu to remove any isolated pixels within a scanned bitmap image. The selected spot filter is applied to the artwork on all bitmap layers in a model. A spot filter works better with black and white or ...
Model > Crop
Model > Crop Use this menu option to crop a model area using one or more vectors. To crop the model area using vectors: Select the vectors that represent the area of the model that you want to keep. Select Model > Crop. The model area outside of the ...
Model > Add Border
Model > Add Border Use this menu option to create a border around a model in the current secondary colour. All existing relief layers in the model are extended by the width of the specified border. The Add Border button on the Model toolbar is a ...
Model > Create Greyscale
Model > Create Greyscale Use this menu option to create a greyscale image of the active relief layer or the composite relief. A greyscale is an image in which the only colours are shades of grey. The Create Greyscale button on the Model toolbar is a ...
Model > Rotate 90 Degrees > Anticlockwise
Model > Rotate 90 Degrees > Anticlockwise Use this menu option to rotate the model counter-clockwise through 90 degrees. The Rotate Model Anticlockwise button on the Model toolbar is a shortcut for this menu option. The accessibility of this button ...
Model > Rotate 90 Degrees > Clockwise
Model > Rotate 90 Degrees > Clockwise Use this menu option to rotate the model clockwise through 90 degrees. The Rotate Model Clockwise button on the Model toolbar is a shortcut for this menu option. The accessibility of this button is layout ...
Model > Rotate 90 Degrees
Model > Rotate 90 Degrees Use the options on this submenu to rotate the model clockwise or counter-clockwise through 90 degrees. This rotates the content on all layers in the model.
Model > Mirror > Vertical
Model > Mirror > Vertical Use this menu option to mirror the model vertically. The Mirror Model Vertically button on the Model toolbar is a shortcut for this menu option. The accessibility of this button is layout dependent.
Model > Mirror > Horizontal
Model > Mirror > Horizontal Use this menu option to mirror the model horizontally. The Mirror Model Horizontally button on the Model toolbar is a shortcut for this menu option. The accessibility of this button is layout dependent.
Model > Mirror
Model > Mirror Use the options on this submenu to mirror the model. This rotates the content on all layers in the model.
Model > Adjust Resolution
Model > Adjust Resolution Use this menu option to adjust the resolution of a model. This means you can disassociate the bitmap resolution from the model resolution. The Adjust Model Resolution button on the Model toolbar is a shortcut for this menu ...
Model > Set Position
Model > Set Position Use this menu option to set the position of the zero origin of the X and Y axes. The Set Model Position button on the Model toolbar is a shortcut for this menu option. The accessibility of this button is layout dependent. To set ...
Model > Set Size
Model > Set Size Use this menu option to edit the dimensions of an open model. The Set Model Size button on the Model toolbar is a shortcut for this menu option. The accessibility of this button is layout dependent. To edit the dimensions currently ...
Model menu
Model menu Use the options on the Model menu to manage the display of the model.
Introduction
Carveco software is a single solution for designing and making in a multitude of industries, including woodworking, signmaking, theming, engraving and minting. Its simple interface and easy-to-use tools allow hobbyists and independent designers to ...